STRAIGHT ROUTER BITS, LONG SERIES

  • Beautiful clean edge on your finished piece
  • These razor-sharp, double-faced cutters made of special Fatigue Proof® steel and micrograin carbide can withstand even the heaviest work load and still give you a smooth, precise cut every time.
  • Exceptional chip ejection to allow cleaner and more constant cutting.
  • Surface of all CMT bits is protected with our trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue.
  • Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity. CMT bits allow production on an industrial scale using a variety of plywood, composites and natural woods.
 
Safety precautions: never use damaged or worn bits. Always work at the proper feed rate without forcing the  bit. Pay particular attention when making the initial cut with a small diameter bit. For best results when working with small diameter bits, make the cut in more than one pass.
 
Part Number Diameter Shank Cutting Length Length  
812.060.11 15/64" 1/4" 1" 2-3/8" Details
812.064.11 1/4" 1/4" 1" 2-3/8" Details
812.080.11 5/16" 1/4" 1-1/4" 2-3/8" Details
812.095.11 3/8" 1/4" 1-1/4" 2-1/2" Details
812.100.11 10mm 1/4" 1-1/4" 2-3/8" Details
812.120.11 12mm 1/4" 1-1/4" 2-3/8" Details
812.127.11 1/2" 1/4 1-1/4" 2-3/4" Details
812.140.11 14mm 1/4" 1-1/4" 2-3/8" Details
812.150.11 15mm 1/4" 1-1/4" 2-5/8" Details
812.158.11 5/8" 1/4" 1-1/4" 2-3/4" Details
812.160.11 16mm 1/4" 1-1/4" 2-5/8" Details
812.595.11 3/8" 1/2" 1-1/4" 2-7/8" Details
812.600.11 10mm 1/2" 1-1/4" 2-3/4" Details
812.611.11 7/16" 1/2" 1-1/4" 3-1/4" Details
812.620.11 12mm 1/2" 1-1/4" 2-3/4" Details
812.621.11 12mm 1/2" 1-1/2" 3-3/4" Details
812.627.11 1/2" 1/2" 1-1/2" 3-3/4" Details
812.628.11 1/2" 1/2" 2" 4-1/4" Details
812.629.11 1/2" 1/2" 2-1/2" 4-3/8" Details
812.660.11 16mm 1/2" 1-1/4" 2-3/4" Details
812.690.11 3/4" 1/2" 1-1/2" 3-1/4" Details
812.691.11 3/4" 1/2" 2" 3-5/8" Details