UZ50 Triumph Beveller with 3D Manipulator

UZ50 TRIUMPH Bevelling System is another unique solution developed by N.KO Machines, where three bevelling systems are combined into a single machine. The UZ50 Triumph can be used as a mobile beveller which moves along the beveled material at the speed up to 1.2 m/min / 3.93 ft/min. The range of the bevelling angle is 15° to 60°. It is also possible to flip the entire machine upside down and create bevels for X and K form of the welds without handling machined material. This is possible through the rotary mechanism of the 3D manipulator, which is is included as standard equipment. In addition, the machine can be turned into a stationary beveller by attaching the UZP 30 add-on table, to process smaller parts with a minimum length bevel edge of 200 mm / 8.19”.

Adjustable cutting conditions enable the UZ50 to machine otherwise difficult materials like stainless steel, Hardox (armoured steel), Weldox and Domex on top of mild carbon steel. The 3D manipulator adapts the UZ50 to any unevenness or deformation in the length of machined material, and allows work on uneven
floor. If needed, the UZ50 can be disconnected from the manipulator in a few seconds due to the quickconnect function for use separately.

Technical data
Maximum bevel width 62 mm / 2.44”
Adjusting the bevel angle 15° to 60° (continuous)
Material thickness 7 to 80 mm / 0.27 to 3.15”
Motor of cutting head 4,000 W
Feed speed 0 - 1.2 m/min / 0 - 3.93 ft/min
Weight 175 kg / 385.8 lbs
Dimensions 1,010 x 745 x 1,326 mm
39.76 x 29.33 x 52.2”
Number of cutting inserts 5 pieces